Gyms and Fitness Studios
Shock absorption and heavy-duty wear layers handle dropped weights and equipment loads; heat-welded seams keep sweat and water out of joints.
Vinyl Sheet Flooring in Dubai and Abu Dhabi
Premium roll vinyl flooring for homes, gyms, clinics, schools, F&B and commercial spaces across all 7 emirates. Specialists since 2014.
One continuous sheet, fully waterproof, fastest installed cost per square metre of any vinyl category. We supply and install residential roll vinyl from AED 45/sqm (AED 4.2/sqft) and commercial heat-welded sheet from AED 95/sqm (AED 8.8/sqft). Free site visit and itemised quote within 24 hours.
Since 2014 in UAE
1,000+ Projects Completed
Al Quoz Showroom
Free Site Visit + Measurement
Or call +971 50 427 9771
What Is Vinyl Sheet Flooring?
Vinyl sheet flooring is a continuous-roll PVC composite floor covering, supplied in 2-metre, 3-metre or 4-metre wide rolls and 2.0 to 4.0mm thick, installed as a single sheet per room with cold-welded or heat-welded seams where joins are needed. It is the only fully sealed vinyl category, used across UAE hospitals, gyms, schools, F&B back-of-house, and budget-conscious residential wet rooms.
The defining difference between sheet vinyl and plank vinyl is coverage. Plank vinyl ships in boxes of individual 180 to 230mm wide pieces that click-lock together, with a seam at every plank edge. Sheet vinyl arrives as one continuous roll, typically 2m, 3m or 4m wide and up to 25m long. A single 4m by 25m roll covers 100 square metres (about 1,076 sqft) with at most one seam across the entire floor. That structural difference drives every other property: faster installation, lower per-sqm cost, and the only way to achieve a fully sealed surface for hygiene-critical environments. For plank-format vinyl options, see our vinyl plank flooring page.
Sheet vinyl is not linoleum, despite the names being used interchangeably in some UAE markets. Linoleum is made from linseed oil, cork dust, wood flour and jute backing. Vinyl sheet is 100% PVC composite with no natural fibre content. The materials behave differently against water, chemicals and heat. UAE supply now is overwhelmingly PVC sheet; we supply vinyl sheet only, not linoleum.
Three reasons UAE buyers choose vinyl sheet over plank or tile. First, hygiene compliance: heat-welded vinyl sheet creates a single sealed floor surface that meets UAE healthcare and food-safety standards where plank seams do not. Second, installed cost: at AED 45 to 120/sqm (AED 4.2 to 11.2/sqft) supplied and fitted, vinyl sheet is the most cost-effective vinyl per square metre. Third, install speed: a 30 sqm (around 325 sqft) residential room finishes in one day with sheet vinyl, against 1.5 to 2 days with plank.
Where Vinyl Sheet Flooring Works Best
Vinyl sheet earns its place in two very different contexts: hygiene-critical commercial spaces where heat-welded sealed surfaces are mandatory, and budget-smart residential rooms where waterproofing and install speed matter more than premium aesthetics. The applications below cover both.
Commercial Vinyl Sheet Applications
Heat-welded sealed surfaces for hygiene-critical fit-outs across Dubai and Abu Dhabi.
Hospitals and Medical Clinics
Heat-welded seams create a fully sealed floor surface that meets UAE healthcare hygiene requirements; antimicrobial-treated options inhibit bacterial growth.
Schools, Nurseries and Universities
Slip-rated R10 surfaces, chemical-resistant to standard cleaning agents, ADEK and KHDA-compatible hygiene specifications.
F&B Back-of-House and Commercial Kitchens
Chemical resistance to grease and detergents; coved skirting allows full wash-down cleaning without damaging the wall-floor junction.
Retail Back-of-House and Warehouses
Lowest installed cost per sqm across large square footage; durable under trolley and cart traffic.
Garages, Workshops and Auto Bays
Oil and chemical resistance; covers the concrete slab with no seams for fluid ingress.
Residential Vinyl Sheet Applications
Budget-smart waterproofing and fast installation for apartment and villa wet rooms.
Apartment Kitchens
Single sheet under cabinets and appliances; no seam-leak risk from dishwasher overflows.
Apartment Bathrooms
Fully waterproof through-thickness; coved skirting eliminates the wall-to-floor seam.
Laundry Rooms
Washing machine leak protection; cheaper per sqm than SPC for small wet zones.
Villa Garages
Oil-resistant; covers the full slab with one seam or none.
Maid's Rooms and Staff Quarters
Lowest-cost vinyl option for landlord refresh projects.
Storage and Utility Rooms
Easy clean, durable, budget-friendly per sqm.
For apartment-scale projects across multiple rooms, see our apartment vinyl flooring page.
Vinyl Sheet vs Vinyl Plank, Which Should You Choose?
Vinyl sheet works best for seamless coverage in wet zones, hygiene-critical commercial spaces, and budget residential projects. Vinyl plank works best for premium aesthetics, easy spot-repair, and large open living areas where realistic wood or stone visuals matter. Sheet installs faster and costs less per sqm. Plank delivers higher resale value and easier plank-level maintenance.
| Feature | Vinyl Sheet | Vinyl Plank (SPC / LVT / WPC / Plank) |
|---|---|---|
| Format | Continuous roll (2m / 3m / 4m wide) | Individual planks (180 to 230mm wide by 1,200 to 1,800mm long) |
| Seams | One seam per 4m width, or heat-welded sealed | Click-lock seam at every plank edge |
| Waterproof | Fully waterproof, heat-welded sealed option | Fully waterproof (SPC/WPC), top-layer (LVT/Plank) |
| Hygiene | Best, sealed seams meet hospital and school compliance | Good, but plank seams collect moisture in heavy wet zones |
| Install Speed | Fastest, 30 sqm (around 325 sqft) in one day | Standard, 30 sqm (around 325 sqft) in 1.5 to 2 days |
| Spot Repair | Patch repair only (visible seam) | Plank-level replacement (near-invisible) |
| Aesthetic | Functional; basic wood, stone and abstract prints | Premium wood and stone realism, wide design range |
| Best Use | Commercial hygiene + budget residential wet rooms | Living rooms, bedrooms, premium villas and apartments |
| Installed Cost (AED/sqm) | AED 45 to 120 | AED 35 to 350 (full plank range) |
| Installed Cost (AED/sqft) | AED 4.2 to 11.2 | AED 3.3 to 32.5 (full plank range) |
For a clinic, gym, school, or kitchen wet zone, sheet wins. For a master bedroom or open-plan villa living room, plank wins. Many UAE projects use both: sheet vinyl in the kitchen and bathrooms, plank vinyl in the bedrooms and living areas. Our team specs both side by side at the site visit and quotes them as one project. Compare specific plank options on our SPC flooring and LVT flooring pages.
Vinyl Sheet Flooring Specifications
Vinyl sheet specifications vary widely between residential and commercial use. Commercial-grade material is thicker, has a heavier wear layer, accepts heat welding, and carries antimicrobial treatment and fire ratings that residential grade does not. The table below maps spec to application.
| Spec | Residential Grade | Commercial Grade | Heavy-Duty / Hospital Grade |
|---|---|---|---|
| Total Thickness | 2.0 to 2.5mm | 2.5 to 3.0mm | 3.0 to 4.0mm |
| Wear Layer | 0.15 to 0.30mm | 0.30 to 0.50mm | 0.50 to 0.70mm |
| Roll Width | 2m or 3m | 2m, 3m or 4m | 2m or 4m |
| Roll Length | 25m typical | 25m or 30m | 25m or 30m |
| Seam Method | Cold-welded (chemical bond) | Heat-welded option | Heat-welded mandatory |
| Antimicrobial Treatment | Optional | Optional | Standard |
| Slip Rating | R9 standard | R10 commercial | R10 / R11 wet zones |
| Fire Rating | Bfl-s1 | Bfl-s1 / Cfl-s1 | Bfl-s1 (UAE Civil Defence compliant) |
| Service Life | 10 to 15 years | 15 to 20 years | 20 to 25 years |
The wear layer drives lifespan more than total thickness. A 2.5mm sheet with a 0.30mm wear layer outlasts a 3.0mm sheet with a 0.15mm wear layer in the same traffic conditions. For UAE hospital and gym specifications, the minimum we supply is 0.50mm wear layer with a total thickness of 3.0mm or more.
Heat welding is the commercial differentiator. A hot-air gun, typically running at 400 to 450°C, fuses adjacent sheet edges using a matching PVC welding rod. The rod melts into a 3.5mm wide pre-grooved channel cut two-thirds into the sheet thickness, then is trimmed flush after cooling. The result is a single waterproof surface with no joint line. Required for hospitals, F&B back-of-house kitchens, gym wet zones, and any space subjected to wash-down cleaning.
Antimicrobial treatment uses silver-ion or zinc-based additives integrated into the wear layer during manufacture. These additives inhibit bacterial growth on the floor surface, supporting healthcare and education facility hygiene requirements. Standard on hospital-grade sheet; optional on commercial and residential grades.
Slip rating follows the DIN 51130 standard. R9 is adequate for residential dry areas. R10 is the commercial baseline for offices, retail and schools. R11 is required for wet zones, F&B kitchens, and changing rooms. We confirm the slip rating against the use case at site visit.
UAE Civil Defence compliance requires a minimum fire rating of Bfl-s1 for residential and Cfl-s1 for certain commercial categories. All material we supply carries the relevant certification.
How Much Does Vinyl Sheet Flooring Cost in Dubai and Abu Dhabi?
Vinyl sheet flooring in Dubai and Abu Dhabi typically ranges from AED 45 to AED 120 per square metre installed (AED 4.2 to 11.2 per square foot), depending on grade, thickness and seam method. For a 100 sqm (1,076 sqft) commercial gym fit-out using heat-welded mid-tier sheet, the all-in cost typically lands between AED 7,500 and AED 11,000 supplied and fitted.
Cost per square metre (supply + installation)
| Grade | AED/sqm | AED/sqft | Best For |
|---|---|---|---|
| Residential Standard | AED 45 to 65 | AED 4.2 to 6.0 | Apartment kitchens, bathrooms, laundry rooms |
| Residential Premium | AED 65 to 90 | AED 6.0 to 8.4 | Garage floors, multi-room residential projects |
| Commercial Mid | AED 75 to 95 | AED 7.0 to 8.8 | Retail back-of-house, schools, offices |
| Commercial Premium / Heavy-Duty | AED 95 to 120 | AED 8.8 to 11.2 | Hospitals, gyms, F&B back-of-house, heat-welded |
Indicative project totals (mid-tier mix)
| Project Type | Approx. Floor Area | Mid-Tier Total (AED) |
|---|---|---|
| Apartment kitchen + bathroom + laundry | ~25 sqm (~270 sqft) | AED 1,500 to 3,000 |
| Single-room residential (garage or storage) | ~40 sqm (~430 sqft) | AED 2,200 to 4,500 |
| Small commercial (clinic room or nursery class) | ~60 sqm (~645 sqft) | AED 4,500 to 7,500 |
| Medium gym or fitness studio | ~150 sqm (~1,615 sqft) | AED 11,000 to 17,500 |
| Large commercial (school floor or hospital ward) | ~400 sqm (~4,305 sqft) | AED 30,000 to 48,000 |
Every project is different. Subfloor condition, heat-welded seam linear metres, coved skirting requirements, after-hours commercial install surcharges, and antimicrobial spec upgrades all shift the final number. The free site visit gives an accurate quote on the actual space, not a phone estimate based on sqm alone.
Get an itemised vinyl sheet flooring quote within 24 hours
Get My Free QuoteHow We Install Vinyl Sheet Flooring
Sheet vinyl installs faster than plank vinyl but is more technically demanding. Cutting accuracy is unforgiving (one mis-cut on a 4m wide roll wastes the entire piece), adhesive coverage must be even across the full sheet, and heat welding requires trained installers with the right equipment. Our team has completed over 1,000 UAE projects since 2014, residential and commercial.
1
Day 0
Free Site Visit and Measurement
Surveyor measures room geometry, checks subfloor flatness and moisture, advises on roll width to minimise seams.
2
Within 24 Hours
Itemised Quote
Written breakdown by sheet sqm, heat-welded linear metres, coved skirting, transitions, and any subfloor prep. No lump-sum estimates.
3
Day Before Install
Material Delivery + Acclimatisation
Vinyl roll delivered, unrolled flat, acclimatised at 18 to 29°C for minimum 24 hours to prevent post-install seam-pull.
4
Install Day
Subfloor Prep + Roll-Out
Subfloor cleaned, levelled where needed. Sheet positioned, cut precisely, adhesive applied, rolled from centre to edges.
5
After Cure
Heat Welding (Commercial)
Seams grooved 2/3 deep at 3.5mm, heat-welded with matching PVC rod at 400 to 450°C. Trimmed flush in two passes for sealed surface.
6
Final Day
Inspection and Handover
Walkthrough covers seam integrity, coving, transitions. Care guide and warranty handed over. 24-hour no-traffic, 5-day no-mop cure period.
Typical install timelines
| Project Size | Standard Install | Heat-Welded Install |
|---|---|---|
| Up to 30 sqm (~325 sqft) | 1 day | 1.5 days |
| 30 to 100 sqm (~325 to 1,075 sqft) | 1.5 to 2 days | 2 to 3 days |
| 100 to 300 sqm (~1,075 to 3,230 sqft) | 2 to 4 days | 3 to 5 days |
| 300+ sqm (~3,230+ sqft) | 4+ days | 5+ days |
Built for UAE Climate and Compliance Standards
UAE buyers and facility managers need flooring that meets both local climate stressors and local regulatory requirements. Vinyl sheet handles both with the right specification.
Climate stability. UAE temperatures range from 22 to 24°C indoor AC to 45°C and higher in sun-exposed and uncooled spaces. Vinyl sheet PVC composite holds dimensional stability across this 20°C+ gap. Properly glued sheet does not develop expansion gaps or seam-pull seen in laminate and engineered wood across the same range. For ground-floor commercial spaces and basement back-of-house, this stability is critical.
UAE regulatory compliance breaks across four frameworks for commercial vinyl sheet. UAE Civil Defence requires fire rating Bfl-s1 minimum for residential and Cfl-s1 for certain commercial categories; all material we supply carries the certification. UAE healthcare facilities follow MOHAP (Ministry of Health and Prevention) and the Department of Health Abu Dhabi (DOH) hygiene specifications, which favour heat-welded sealed surfaces with antimicrobial treatment and coved skirting. Schools and nurseries follow ADEK (Abu Dhabi Department of Education and Knowledge) and KHDA (Knowledge and Human Development Authority) standards for slip resistance and chemical resistance to standard cleaning agents. F&B back-of-house projects typically follow HACCP guidance for sealed floor surfaces and coved wall junctions.
Coastal humidity reaches 80 to 85% during UAE summer in areas like Palm Jumeirah, Saadiyat Island, Yas Island, Al Reem Island and Al Raha Beach. Through-body PVC sheet is unaffected by ambient moisture; the composite absorbs effectively zero water. Critical for ground-floor commercial spaces and basement utility rooms where natural materials fail within months.
Why UAE Clients Choose Urban Vinyl Flooring for Vinyl Sheet
Vinyl sheet projects split into two very different buyer types: facility managers specifying for hospital, school, gym or F&B fit-outs, and apartment owners budgeting a single kitchen or bathroom refresh. We service both with the same standards.
Reason 01
12 Years of UAE Vinyl Specialism
Operating since 2014, focused exclusively on vinyl flooring across all five categories: SPC, LVT, WPC, vinyl plank, and vinyl sheet. Specialists, not generalists.
Reason 02
1,000+ Completed Projects
From single-bathroom apartment refreshes in JVC to commercial floor projects across Dubai and Abu Dhabi. Depth at every scale.
Reason 03
Heat-Welding Capability In-House
Trained team, owned equipment, no subcontracted welds. Hospital-grade, gym-grade and F&B-grade heat-welded installs handled end-to-end by our own installers.
Reason 04
Al Quoz Showroom and Warehouse
Dubai's flooring industry hub at 3 Al Asayel Street, Al Quoz Industrial Area 3. Full vinyl sheet roll sample range. Walk-in available Saturday to Thursday, 9 AM to 7 PM.
Reason 05
Free Site Visit and Itemised Quote in 24 Hours
Same standard for a 25 sqm (270 sqft) apartment bathroom and a 5,000 sqm (53,800 sqft) commercial fit-out. No obligation, no deposit. Learn more about our team.
Vinyl Sheet Flooring for UAE Industries
Our vinyl sheet work covers both B2B commercial fit-outs and B2C residential projects across Dubai, Abu Dhabi and the wider UAE.
Commercial Clients
- Hospitals and Medical Clinics
- Schools, Nurseries and Universities
- Gyms and Fitness Studios
- F&B Back-of-House and Commercial Kitchens
- Retail Back-of-House and Stockrooms
- Garages and Auto Workshops
- Warehouses and Light Industrial
- Hotels (Staff Areas and Back-of-House)
- Veterinary Clinics
- Pharmacies
Residential Clients
- Apartment Kitchens
- Apartment Bathrooms and Laundry Rooms
- Villa Garages
- Villa Staff Quarters and Maid's Rooms
- Storage and Utility Rooms
- Budget Apartment Refreshes
- Rental Property Turnover Refreshes
- Pool Equipment Rooms
Whatever the project, from a single apartment bathroom to a 5,000 sqm (53,800 sqft) hospital floor, we quote, supply and install end-to-end. Contact us for your project.
Frequently Asked Questions About Vinyl Sheet Flooring
What is the difference between vinyl sheet and vinyl plank flooring?
Vinyl sheet is a single continuous roll, 2m to 4m wide, with at most one seam per width or fully heat-welded sealed. Vinyl plank is individual interlocking pieces with a click-lock seam at every plank edge. Sheet installs faster and costs less per sqm. Plank delivers better aesthetics and easier spot repair. Compare specs on our vinyl plank flooring page.
How much does vinyl sheet flooring cost per square metre in Dubai?
Residential grade ranges AED 45 to 90/sqm (AED 4.2 to 8.4/sqft) supplied and installed. Commercial mid-grade ranges AED 75 to 95/sqm (AED 7.0 to 8.8/sqft). Heavy-duty hospital and gym grade ranges AED 95 to 120/sqm (AED 8.8 to 11.2/sqft). Free site visit gives the exact quote on your actual project.
Is vinyl sheet flooring waterproof?
Yes, fully. Sheet vinyl is 100% PVC composite, waterproof through the entire thickness, not just the surface. Heat-welded seams create a completely sealed floor surface with no joint line. The strongest option for hospital wet rooms, gym wet zones, F&B kitchens, and residential bathrooms.
Can vinyl sheet flooring be installed in a hospital or clinic?
Yes. Hospital-grade vinyl sheet with antimicrobial treatment, heat-welded seams, coved skirting and 0.50mm or thicker wear layer is the UAE healthcare standard. We supply MOHAP and DOH compliant material with the relevant fire-rating certification, installed by our in-house heat-welding team across Dubai and Abu Dhabi healthcare facilities.
What does heat-welded vinyl sheet flooring mean?
Heat welding fuses adjacent sheet edges using a hot-air gun at 400 to 450°C and a matching PVC welding rod. The rod melts into a pre-grooved channel, then is trimmed flush in two passes after cooling. The result is a single sealed floor surface with no joint line. Required for hospitals, F&B kitchens, and wash-down cleaning environments. See our full installation process.
How long does vinyl sheet flooring last?
Residential grade lasts 10 to 15 years. Commercial mid-grade lasts 15 to 20 years. Heavy-duty hospital, gym and F&B grade lasts 20 to 25 years. Service life depends primarily on wear layer thickness (0.15mm for residential, 0.50mm or thicker for heavy commercial) and traffic load, not total sheet thickness.
Is vinyl sheet flooring suitable for apartment kitchens?
Yes, and it is one of the smartest budget choices. A 12 sqm (~130 sqft) apartment kitchen in mid-grade sheet vinyl installs for AED 600 to 900 supplied and fitted. Fully waterproof, single sheet under cabinets and appliances, no seam-leak risk from dishwasher overflows. Check building management approval before scheduling install. Request a quote for your apartment kitchen.
What thickness of vinyl sheet flooring do I need?
Residential bathrooms and kitchens: 2.0 to 2.5mm total thickness. Light commercial offices and retail: 2.5 to 3.0mm. Heavy-duty hospital, gym and F&B: 3.0 to 4.0mm with a 0.50mm or thicker wear layer. Wear layer thickness matters more for service life than total sheet thickness.
Can vinyl sheet flooring be installed over existing tiles?
Yes, if the tile is flat and firmly bonded. Deep grout lines may need self-levelling compound first to prevent the seams telegraphing through the sheet. The existing tile becomes the subfloor and the new sheet glues over it. Saves 1 to 2 days of demolition and avoids tile disposal costs.
Do you serve commercial vinyl sheet projects in Abu Dhabi?
Yes. Full Abu Dhabi coverage for commercial fit-outs across healthcare, education, F&B, retail and hospitality. Same supply, installation and in-house heat-welding team as Dubai. Free site visit and itemised quote within 24 hours. Travel from our Al Quoz showroom is included in the quote.
Ready to Plan Your Vinyl Sheet Flooring Project?
A surveyor can be on site within 48 hours of your enquiry. Free site visit, free measurement, in-house heat-welding capability, and an itemised quote in your inbox within 24 hours of the visit. Twelve years of UAE vinyl specialism, over 1,000 completed projects, and one team handling everything from a single apartment bathroom to a 5,000 sqm hospital floor.
Or call +971 50 427 9771
Visit our showroom
Warehouse, 3 Al Asayel Street, Al Quoz Industrial Area 3, Dubai, United Arab Emirates
Saturday to Thursday, 9 AM to 7 PM
Warehouse, 3 Al Asayel Street, Al Quoz Industrial Area 3, Dubai, United Arab Emirates
Saturday to Thursday, 9 AM to 7 PM